Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Sabnzbd+ x86 & x64][2.0.0.4] Usenet Grabber
(Yesterday, 12:21 AM)HeMaN Wrote:
(04-25-2017, 05:07 AM)outkastm Wrote: added x64 2.0.1.1, test and provide feedback
Code:
include par multicore
Python 2.05.04 is required

Installed and downloading without problem! So far so good.
No more warning about Multipar. Not yet been able to test multipar functioning when repairing a download.
Forced an incomplete download, repair with par2 and this is also working fine!

Thx for feedback
-----------------------------------------------------------------------------------------------------
[Image: linkedinbutton.jpg]
Download modules from my forum https://pirinel.ro/forum
Reply
I also installed the latest mod 2.0.1.1 and Python 2.05.04 but still the warning "Multicore Par2 - Not Available".
__________________________________________
N5550 with 5* WD20EFRX RAID5 and APC UPS
Memory: 2Gb (original) + 2 Gb = 4003 Mb available
Firmware v2.06.01.cdv - OS5
Reply
Try to remove Sabnzbd and install it backup.
If still the same, remove Python also and install it back
But normally this should not be necessary
-----------------------------------------------------------------------------------------------------
[Image: linkedinbutton.jpg]
Download modules from my forum https://pirinel.ro/forum
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [ SABnzbd x64 cdv ] [0.8.0Beta2] Usenet Grabber citizen 11 3,151 12-18-2015, 12:45 AM
Last Post: HeMaN
  [ SABnzbd+ x86 & x64 & PPC ] [0.7.20.0] Usenet Grabber Qoolbox 566 93,490 11-14-2015, 08:24 AM
Last Post: gtr33m
  [ SABnzbd x64 ] [0.8.0Beta1] Usenet Grabber citizen 35 2,620 11-02-2015, 05:52 PM
Last Post: domi1kenobi
  [ NZBGet x86 & x64 & PPC ] [ 14.1.0 ] Usenet Grabber Qoolbox 99 22,518 10-26-2015, 02:51 AM
Last Post: SmashIt
  [ NNTPGrab x86 & x64 ] [ 0.7.2.0 ] Usenet Grabber Qoolbox 3 1,188 02-19-2013, 11:07 PM
Last Post: Qoolbox
  Ninan Newsgroup Usenet Grabber V2.1 MODULE Qoolbox 78 12,859 02-17-2012, 04:38 PM
Last Post: JayDee
  [ NZBGet x86 & x64 & PPC ] [ 14.1.0 ] Usenet Grabber 0 18,953 Less than 1 minute ago
Last Post:
  [ NNTPGrab x86 & x64 ] [ 0.7.2.0 ] Usenet Grabber 0 1,003 Less than 1 minute ago
Last Post:
  [ SABnzbd x64 ] [0.8.0Beta1] Usenet Grabber 0 1,102 Less than 1 minute ago
Last Post:
  [ SABnzbd x64 cdv ] [0.8.0Beta2] Usenet Grabber 0 2,648 Less than 1 minute ago
Last Post:
  [Sabnzbd+ x86 & x64][1.1.0.0RC3] Usenet Grabber 0 8,602 Less than 1 minute ago
Last Post:

Forum Jump:


Users browsing this thread: 1 Guest(s)