Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[ Sabnzbd+ ] Usenet Grabber
#46
Thx for feedback. I will update the module when I have a little time.
-----------------------------------------------------------------------------------------------------
[Image: linkedinbutton.jpg]
Download modules from my forum pirinel.ro
Reply
#47
Thx for feedback. I will update the module when I have a little time.
-----------------------------------------------------------------------------------------------------
[Image: linkedinbutton.jpg]
Download modules from my forum pirinel.ro
Reply
#48
Dank je voor al de moeite en de Beste wensen voor 2016!
Thecus N5550 (CPU: D2550 @ 1.86GHz, BIOS: CDV_T26 X64)
Disks:  4*3TB Raid5 (4 * Hitachi Ultrastar 7K3000 HUA723030ALA640)
Memory:  8GB (2*4GB Corsair CMSO8GX3M2A1333C9)
Firmware: 2.05.14.5 (with MEM=4G removed from menu.lst)
Reply
#49
Dank je voor al de moeite en de Beste wensen voor 2016!
Thecus N5550 (CPU: D2550 @ 1.86GHz, BIOS: CDV_T26 X64)
Disks:  4*3TB Raid5 (4 * Hitachi Ultrastar 7K3000 HUA723030ALA640)
Memory:  8GB (2*4GB Corsair CMSO8GX3M2A1333C9)
Firmware: 2.05.14.5 (with MEM=4G removed from menu.lst)
Reply
#50
Hi Outkastm,

FYI I've also encountered the same issue with SFV verification on Beta 3 & 4.
Reply
#51
Hi Outkastm,

FYI I've also encountered the same issue with SFV verification on Beta 3 & 4.
Reply
#52
x64 updated to 0.8.0.4-1
added par2 and unrar
Code:
par2cmdline version 0.6.14

Copyright (C) 2003-2015 Peter Brian Clements.
Copyright (C) 2011-2012 Marcel Partap.
Copyright (C) 2012-2015 Ike Devolder.
Code:
UNRAR 5.30 beta 2 freeware      Copyright (c) 1993-2015 Alexander Roshal
-----------------------------------------------------------------------------------------------------
[Image: linkedinbutton.jpg]
Download modules from my forum pirinel.ro
Reply
#53
x64 updated to 0.8.0.4-1
added par2 and unrar
Code:
par2cmdline version 0.6.14

Copyright (C) 2003-2015 Peter Brian Clements.
Copyright (C) 2011-2012 Marcel Partap.
Copyright (C) 2012-2015 Ike Devolder.
Code:
UNRAR 5.30 beta 2 freeware      Copyright (c) 1993-2015 Alexander Roshal
-----------------------------------------------------------------------------------------------------
[Image: linkedinbutton.jpg]
Download modules from my forum pirinel.ro
Reply
#54
Perfect, thank you outkastm, works well for me!!
-------------------------------------------------
Thecus N5550 OS 7
Disks: 5*4TB Raid5
Memory: 3GB
Firmware: 3.01.00.2.cdv
Reply
#55
Perfect, thank you outkastm, works well for me!!
-------------------------------------------------
Thecus N5550 OS 7
Disks: 5*4TB Raid5
Memory: 3GB
Firmware: 3.01.00.2.cdv
Reply
#56
Also updated for x86 version

outkastm Wrote:x64 updated to 0.8.0.4-1
added par2 and unrar
Code:
par2cmdline version 0.6.14

Copyright (C) 2003-2015 Peter Brian Clements.
Copyright (C) 2011-2012 Marcel Partap.
Copyright (C) 2012-2015 Ike Devolder.
Code:
UNRAR 5.30 beta 2 freeware      Copyright (c) 1993-2015 Alexander Roshal
-----------------------------------------------------------------------------------------------------
[Image: linkedinbutton.jpg]
Download modules from my forum pirinel.ro
Reply
#57
Also updated for x86 version

outkastm Wrote:x64 updated to 0.8.0.4-1
added par2 and unrar
Code:
par2cmdline version 0.6.14

Copyright (C) 2003-2015 Peter Brian Clements.
Copyright (C) 2011-2012 Marcel Partap.
Copyright (C) 2012-2015 Ike Devolder.
Code:
UNRAR 5.30 beta 2 freeware      Copyright (c) 1993-2015 Alexander Roshal
-----------------------------------------------------------------------------------------------------
[Image: linkedinbutton.jpg]
Download modules from my forum pirinel.ro
Reply
#58
Hi Outkastm,

Thanks for the update, however the x86 variant seems to be unstable, list of issues noted as follows..

- Download stop/starts (pulsing) noted by peaks/troughs on histogram, adjusting download bitrate temporarily resolves
- Downloads randomly failing with SAB reporting 'suspect error in Downloader'
- Still getting SFV verification errors, resulting in further failures

Appreciative if you can take a look, in the interim I'll revert back to NZBget 14.01 which kind of works OK, although does have a known issue with config file entry duplication's that will cause a failure at some point...

I note NZBget has version 16 available any chance of creating an update for this?

Thanks in advance Echelon.
Reply
#59
Hi Outkastm,

Thanks for the update, however the x86 variant seems to be unstable, list of issues noted as follows..

- Download stop/starts (pulsing) noted by peaks/troughs on histogram, adjusting download bitrate temporarily resolves
- Downloads randomly failing with SAB reporting 'suspect error in Downloader'
- Still getting SFV verification errors, resulting in further failures

Appreciative if you can take a look, in the interim I'll revert back to NZBget 14.01 which kind of works OK, although does have a known issue with config file entry duplication's that will cause a failure at some point...

I note NZBget has version 16 available any chance of creating an update for this?

Thanks in advance Echelon.
Reply
#60
Hi,

Does anyone else has the message in the log that says;

INFO::[SABnzbd:488] _yenc module... NOT found!

I have installed the [Python2] [2.00.01] module which supposed to have this yenc module.

I am using Sabnzb+ x64 0.8.0.4.1 beta on my N5550

Thanks.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [ SABnzbd x64 cdv ] [0.8.0Beta2] Usenet Grabber citizen 11 4,953 12-18-2015, 12:45 AM
Last Post: HeMaN
  [ SABnzbd+ x86 & x64 & PPC ] [0.7.20.0] Usenet Grabber Qoolbox 566 133,043 11-14-2015, 08:24 AM
Last Post: gtr33m
  [ SABnzbd x64 ] [0.8.0Beta1] Usenet Grabber citizen 35 6,474 11-02-2015, 05:52 PM
Last Post: domi1kenobi
  [ NZBGet x86 & x64 & PPC ] [ 14.1.0 ] Usenet Grabber Qoolbox 99 32,379 10-26-2015, 02:51 AM
Last Post: SmashIt
  [ NNTPGrab x86 & x64 ] [ 0.7.2.0 ] Usenet Grabber Qoolbox 3 2,041 02-19-2013, 11:07 PM
Last Post: Qoolbox
  Ninan Newsgroup Usenet Grabber V2.1 MODULE Qoolbox 78 20,655 02-17-2012, 04:38 PM
Last Post: JayDee
  [ NZBGet x86 & x64 & PPC ] [ 14.1.0 ] Usenet Grabber 0 19,219 Less than 1 minute ago
Last Post:
  [ NNTPGrab x86 & x64 ] [ 0.7.2.0 ] Usenet Grabber 0 1,223 Less than 1 minute ago
Last Post:
  [ SABnzbd x64 ] [0.8.0Beta1] Usenet Grabber 0 1,391 Less than 1 minute ago
Last Post:
  [ SABnzbd x64 cdv ] [0.8.0Beta2] Usenet Grabber 0 2,893 Less than 1 minute ago
Last Post:
  [Sabnzbd+ x86 & x64][1.1.0.0RC3] Usenet Grabber 0 8,848 Less than 1 minute ago
Last Post:

Forum Jump:


Users browsing this thread: 2 Guest(s)