[ Sabnzbd+ ] Usenet Grabber

[HeMaN]

Think I found the issue. When disabling all IPv6 options (no load balancing servers, no ipv6, no ipv6 server) the response is back to normal and downloading again.

thnx for this module!

[GodZZila]

Release 4 is out now.

The crashes in the interface has been solved in this version.

<!-- m --><a class="postlink" href="http://sourceforge.net/projects/sabnzbdplus/files/sabnzbdplus-beta/0.8.0Beta4/">http://sourceforge.net/projects/sabnzbd ... .8.0Beta4/</a><!-- m -->

Can you please upgrade the modules outkast? I need the x64 version.
I can mannualy upgrade this. But how do you make a .mod Is there anny tuturial?

Happy X-Mas everybody

[GodZZila]

Release 4 is out now.

The crashes in the interface has been solved in this version.

<!-- m --><a class="postlink" href="http://sourceforge.net/projects/sabnzbdplus/files/sabnzbdplus-beta/0.8.0Beta4/">http://sourceforge.net/projects/sabnzbd ... .8.0Beta4/</a><!-- m -->

Can you please upgrade the modules outkast? I need the x64 version.
I can mannualy upgrade this. But how do you make a .mod Is there anny tuturial?

Happy X-Mas everybody

[GodZZila]

Beta 8.04 is working great now on my system.

[GodZZila]

Beta 8.04 is working great now on my system.

[HeMaN]

Beta 8.04 is working great now on my system.

How did you do the update?

=======

Got it figured out
Downloaded the Linux source from Sourceforge, en put that code in the modules bin directory.
Working here as well

[HeMaN]

Beta 8.04 is working great now on my system.

How did you do the update?

=======

Got it figured out
Downloaded the Linux source from Sourceforge, en put that code in the modules bin directory.
Working here as well

[GodZZila]

That's right

[GodZZila]

That's right

[outkastm]

added latest beta 4

[outkastm]

added latest beta 4

[ehfred10]

Hi,

This version is correctly installed oh my Thecus but i'm having issues with the repar stage.

It's not the 1st time i have this... Befor i though it was the nzb too old or smth...

But yesterday i tried to test the same NZB with an older version of sab (0.7.17) and... it works... I don't know why...

This is the error:

Code:

Stage Repair
    Trying SFV verification
    Some files failed to verify against "67338-0.sfv";

The nzb is correct and i have par2 downloaded.

Does anybody have same problem?

---------
update:

In fact, i've tested beta 3 and beta 2 release. And beta 2 works fine (except ssl connection). beta 3 and 4 not. Did i missed something?

[ehfred10]

Hi,

This version is correctly installed oh my Thecus but i'm having issues with the repar stage.

It's not the 1st time i have this... Befor i though it was the nzb too old or smth...

But yesterday i tried to test the same NZB with an older version of sab (0.7.17) and... it works... I don't know why...

This is the error:

Code:

Stage Repair
    Trying SFV verification
    Some files failed to verify against "67338-0.sfv";

The nzb is correct and i have par2 downloaded.

Does anybody have same problem?

---------
update:

In fact, i've tested beta 3 and beta 2 release. And beta 2 works fine (except ssl connection). beta 3 and 4 not. Did i missed something?

[HeMaN]

Hi Outkastm,

I was fidling a bit around, and noticed there is a newer vervsion of unrar available (5.3 beta 6), I "borrowed" this one from the sabnzbdplus package and used it to update your installed package
(Your installation is using unrar 5.2 beta 1)

As far for par2, when I try to run that from the commandline I get the next error:

Code:

N5550:/raid/module/SabnzbdPlus/sys/bin# ./par2 -h
./par2: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by ./par2)

There seems to be missing some package/dependancy during compilation?
"Solved" this by replacing the existing par2 with the par2 (0.6.4) from the package above as well

[HeMaN]

Hi Outkastm,

I was fidling a bit around, and noticed there is a newer vervsion of unrar available (5.3 beta 6), I "borrowed" this one from the sabnzbdplus package and used it to update your installed package
(Your installation is using unrar 5.2 beta 1)

As far for par2, when I try to run that from the commandline I get the next error:

Code:

N5550:/raid/module/SabnzbdPlus/sys/bin# ./par2 -h
./par2: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by ./par2)

There seems to be missing some package/dependancy during compilation?
"Solved" this by replacing the existing par2 with the par2 (0.6.4) from the package above as well