Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[FaJoSSHD] [1.05.01] Module released
#1
Please use a dedicated thread for issues, questions and comments. This thread shall be used to announce new releases of the module only and too many posts will make the thread confusing and hard to read.

I just updated the FaJoSSHD module for the 32bit and 64bit platform based models. The module can be downloaded from my web page:

After enabling the module the SSH daemon will listen on port 10022 by default which can be changed on the module configuration page. To login use the username root along with the admin password (since 1.03.00).

/Falk

Binary releases included:
  • OpenSSH 6.1p1
  • OpenSSL 1.0.1c
  • zLib 1.2.7

Supported models:
  • 1U4200XXX, N2800, 1U4500, N4510U, 1U4600, N4800, M3800, N4800Eco, N0503, N5550, N2200XXX, N6850, N3200PRO, N7510, N3200XXX, N7700PROv2, N4100PRO, N8800PROv2, N4200, N8900, N4200Eco, N8850, N4200PRO, N8900V, N10850, N5200, N12000, N5200PRO, N12000V, N5200XXX, N16000, N5500, N16000V, N7700, N7700+, N7700PRO, N7700SAS, N8200XXX, N8800, N8800+, N8800PRO, N8800SAS

Changelog:

Code:
Version 1.05.01 (2012/11/06)

    * fix: large file (system) access on 32bit platforms running XFS

Version 1.05.00 (2012/09/29)

    * updated OpenSSH to 6.1p1
    * updated OpenSSL to 1.0.1c
    * updated zLib to 1.2.7
    * added support for new admin password handling introduced in 64bit firmware 2.03.05+

Version 1.04.00 (2012/04/22)

    * updated OpenSSH to 6.0p1
    * updated OpenSSL to 1.0.1a
    * added shutdown/reboot wrapper scripts for remote shutdown/reboot

Version 1.03.00 (2012/02/14)

    * fixed: "error: setlogin failed: Function not implemented" due to stubbed
      setlogin() in libc (x86 only)
    * new: on startup the root password is set to the value of the admin password
      to allow to login as root without the need to install the SYSUSER module

Version 1.02.00 (2012/01/26)

    * updated OpenSSL to 1.0.0g
    * updated license file
    * aligned to framework

Version 1.01.02 (2011/12/28)

    * added fix for wrong device permissions in Thecus firmware (Ticket: MPE-341391)
    * fixed: missing device spec. for N3200PRO/M3800 in install.rdf

Version 1.01.01 (2011/10/04)

    * fixed: platform links for N4100pro
    * merged into multi platform package

Version 1.01.00 (2011/09/13)

    * updated OpenSSH to 5.9p1
    * updated OpenSSL to 1.0.0e

Version 1.00.00 (2011/09/01)

    * initial release utilizing:
          o OpenSSH 5.8p2
          o OpenSSL 1.0.0d
          o zLib 1.2.5
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#2
Please use a dedicated thread for issues, questions and comments. This thread shall be used to announce new releases of the module only and too many posts will make the thread confusing and hard to read.

I just updated the FaJoSSHD module for the 32bit and 64bit platform based models. The module can be downloaded from my web page:

After enabling the module the SSH daemon will listen on port 10022 by default which can be changed on the module configuration page. To login use the username root along with the admin password (since 1.03.00).

/Falk

Binary releases included:
  • OpenSSH 6.1p1
  • OpenSSL 1.0.1c
  • zLib 1.2.7

Supported models:
  • 1U4200XXX, N2800, 1U4500, N4510U, 1U4600, N4800, M3800, N4800Eco, N0503, N5550, N2200XXX, N6850, N3200PRO, N7510, N3200XXX, N7700PROv2, N4100PRO, N8800PROv2, N4200, N8900, N4200Eco, N8850, N4200PRO, N8900V, N10850, N5200, N12000, N5200PRO, N12000V, N5200XXX, N16000, N5500, N16000V, N7700, N7700+, N7700PRO, N7700SAS, N8200XXX, N8800, N8800+, N8800PRO, N8800SAS

Changelog:

Code:
Version 1.05.01 (2012/11/06)

    * fix: large file (system) access on 32bit platforms running XFS

Version 1.05.00 (2012/09/29)

    * updated OpenSSH to 6.1p1
    * updated OpenSSL to 1.0.1c
    * updated zLib to 1.2.7
    * added support for new admin password handling introduced in 64bit firmware 2.03.05+

Version 1.04.00 (2012/04/22)

    * updated OpenSSH to 6.0p1
    * updated OpenSSL to 1.0.1a
    * added shutdown/reboot wrapper scripts for remote shutdown/reboot

Version 1.03.00 (2012/02/14)

    * fixed: "error: setlogin failed: Function not implemented" due to stubbed
      setlogin() in libc (x86 only)
    * new: on startup the root password is set to the value of the admin password
      to allow to login as root without the need to install the SYSUSER module

Version 1.02.00 (2012/01/26)

    * updated OpenSSL to 1.0.0g
    * updated license file
    * aligned to framework

Version 1.01.02 (2011/12/28)

    * added fix for wrong device permissions in Thecus firmware (Ticket: MPE-341391)
    * fixed: missing device spec. for N3200PRO/M3800 in install.rdf

Version 1.01.01 (2011/10/04)

    * fixed: platform links for N4100pro
    * merged into multi platform package

Version 1.01.00 (2011/09/13)

    * updated OpenSSH to 5.9p1
    * updated OpenSSL to 1.0.0e

Version 1.00.00 (2011/09/01)

    * initial release utilizing:
          o OpenSSH 5.8p2
          o OpenSSL 1.0.0d
          o zLib 1.2.5
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#3
[new release 1.02.00]

Please use a dedicated thread for issues, questions and comments. This thread shall be used to announce new releases of the module only and too many posts will make the thread confusing and hard to read.
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#4
[new release 1.02.00]

Please use a dedicated thread for issues, questions and comments. This thread shall be used to announce new releases of the module only and too many posts will make the thread confusing and hard to read.
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#5
[new release 1.03.00]

Please use a dedicated thread for issues, questions and comments. This thread shall be used to announce new releases of the module only and too many posts will make the thread confusing and hard to read.
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#6
[new release 1.03.00]

Please use a dedicated thread for issues, questions and comments. This thread shall be used to announce new releases of the module only and too many posts will make the thread confusing and hard to read.
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#7
[new release 1.04.00]

Please use a dedicated thread for issues, questions and comments. This thread shall be used to announce new releases of the module only and too many posts will make the thread confusing and hard to read.
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#8
[new release 1.04.00]

Please use a dedicated thread for issues, questions and comments. This thread shall be used to announce new releases of the module only and too many posts will make the thread confusing and hard to read.
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#9
[new release 1.05.00]

Please use a dedicated thread for issues, questions and comments. This thread shall be used to announce new releases of the module only and too many posts will make the thread confusing and hard to read.
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#10
[new release 1.05.01]
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#11
Hi,

Is it possible to activate the "screen" command in this module ?

Thanks !
Reply
#12
Hi,

Is it possible to activate the "screen" command in this module ?

Thanks !
Reply
#13
madorus Wrote:Hi,

Is it possible to activate the "screen" command in this module ?

Thanks !

"screen" is part of ModBase1:

Code:
/raid/data/module/ModBase1/system/bin/screen-4.0.3

With the next release a missing symlink will be added so it can be called as

Code:
/raid/data/module/ModBase1/system/bin/screen

If you want to use the latter before the next release becomes available please create the symlink on your own by calling:

Code:
ln -sf screen-4.0.3 /raid/data/module/ModBase1/system/bin/screen

/Falk
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#14
madorus Wrote:Hi,

Is it possible to activate the "screen" command in this module ?

Thanks !

"screen" is part of ModBase1:

Code:
/raid/data/module/ModBase1/system/bin/screen-4.0.3

With the next release a missing symlink will be added so it can be called as

Code:
/raid/data/module/ModBase1/system/bin/screen

If you want to use the latter before the next release becomes available please create the symlink on your own by calling:

Code:
ln -sf screen-4.0.3 /raid/data/module/ModBase1/system/bin/screen

/Falk
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#15
Thank you !

Is it possible to simply type the command "screen" in the shell during a ssh session ?
It tolds me that the command doesn't exist.

It works when i call the entire path /raid/data/module/ModBase1/system/bin/screen.

Thank you again.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [APCUPSD] [1.05.00] Module released fajo 6 4,419 12-16-2016, 01:16 AM
Last Post: Shrmn
  [FreeRadius] Module released (1.00.00) fajo 9 5,601 11-21-2015, 10:06 PM
Last Post: psydafke
  [FaJoTorrent] [2.00.00] Module released fajo 129 42,668 10-24-2015, 07:02 AM
Last Post: ian
  [OracleJRE7] [1.01.00] Module released fajo 7 3,849 08-31-2015, 02:52 PM
Last Post: dennisboonstra
  [FaJoNTPServer] [1.01.02] Module released fajo 19 8,211 06-01-2015, 11:25 PM
Last Post: eberlepatric
  [FaJoSSHD][1.07.00] Module Updated fajo 11 4,089 04-26-2015, 12:45 PM
Last Post: menkom
  [FaJoCron] [1.01.01] Module released fajo 57 18,290 12-28-2014, 07:47 PM
Last Post: krikke
  [ModBase1] [1.04.00] Module released fajo 176 47,463 10-23-2014, 04:18 AM
Last Post: tobilux
  [ZoneMinder] Module released (1.00.00) fajo 42 15,290 09-13-2014, 08:00 PM
Last Post: sebastienbo
  [ZoneMinder] [1.01.00] Module released fajo 49 22,093 07-24-2014, 04:35 PM
Last Post: 55555missyou
  [FaJoClamAV] [1.00.00] Module released fajo 9 4,573 02-13-2014, 02:43 AM
Last Post: fajo
  [rSyslog] [1.01.00] Module released fajo 19 7,979 02-03-2014, 09:31 AM
Last Post: fajo
  [DynDNS] [1.00.02] module released fajo 9 4,696 01-02-2014, 10:39 AM
Last Post: edv-schuster

Forum Jump:


Users browsing this thread: 1 Guest(s)