Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[ UrBackup x86 & x64 & PPC ] [ 1.4.6.0 ] Backup Server
#1
URBACKUP

Source : http://urbackup.sourceforge.net/


Link :

http://www.positiv-it.fr/thecus/download....0_x86.rar

http://www.positiv-it.fr/thecus/download....0_x64.rar

PPC Version http://www.positiv-it.fr/thecus/download....0_PPC.rar
X86 Version http://www.positiv-it.fr/thecus/download....0_x86.rar
X64 Version http://www.positiv-it.fr/thecus/download....0_x64.rar

[ Current Release ] [ Upgrade not compatible, thanks to make a clean reinstall ]

PPC Version http://www.positiv-it.fr/thecus/download....0_ppc.rar
X86 Version http://www.positiv-it.fr/thecus/download....0_x86.rar
X64 Version http://www.positiv-it.fr/thecus/download....0_x64.rar


[ Previous Version ]

PPC Version http://www.positiv-it.fr/thecus/download....0_ppc.rar [BETA]
X86 Version OS5 http://www.positiv-it.fr/thecus/download....0_x86.rar
X86 Version OS6 http://www.positiv-it.fr/thecus/download...86_OS6.rar
X64 Version http://www.positiv-it.fr/thecus/download....0_x64.rar

PPC Version http://www.positiv-it.fr/thecus/download....0_ppc.rar [BETA BUT WORKING]
X86 Version OS5 http://www.positiv-it.fr/thecus/download...-OS5-6.rar
X86 Version OS6 http://www.positiv-it.fr/thecus/download...-OS5-6.rar
X64 Version http://www.positiv-it.fr/thecus/download....5_x64.rar

[ Current Version ]

PPC Version http://www.positiv-it.fr/thecus/download....0_ppc.rar [BETA BUT WORKING]
X86 Version OS5 http://www.positiv-it.fr/thecus/download...-OS5-6.rar
X86 Version OS6 http://www.positiv-it.fr/thecus/download...-OS5-6.rar
X64 Version http://www.positiv-it.fr/thecus/download....6_x64.rar

ChangeLog :
Code:
1.4.6

Bugfixes:

    Keep session alive as long as channel is alive to fix crash bug when restoring an image backup with accompanying system reserved partition and with required login
    Extended query to filter by clientid when accessing backups. Did not cause security issue, because filesystem access uses the clientname
    Allow "ALL" and "ALL_NONUSB" as special image backup values on web interface
    Nice explanation in case of compression error on NTFS (ERROR_FILE_SYSTEM_LIMITATION)


1.4.5

Critical Bugfixes:

    Always use separate connection to download blocks with wrong hashes, because the patch file format requires the data in ascending order. This rarely causes corrupted files in file backups if the 'block differences' transfer mode is used.

Bugfixes:

    Get allow_overwrite from global settings if local settings are not enabled
    Properly propagate global setting changes to client settings
    Update capabilities after client update
    Fixed log rotation
    Use execvp instead of execvpe in snapshot helper to fix compile errors on some platforms
    Try to automatically set the /etc/urbackup/backupfolder file (in case urbackup is run as root)
    Fixed switching of client from Internet to LAN
    Added assertions and error logging if patch is corrupt
    Fixed big endian issues with file backups
    Fixed wrong file data, if reflinking file fails on btrfs
    Only output warning message if symlinked directory is not found in database
    Continue after reading from base file failed in "block hash differences" transfer mode
    Fixed infinite loop in quota enforcement if deleting image fails

Changes:

    New value "ALL_NONUSB" for volumes to backup to back up all volumes which are not on an usb disk


1.4.4

Bugfixes:

    Fix ' being escaped in settings entered through the web interface
    Better logging if temporary file cannot be created, and create temporary directory if it was created.
    Check snapshot properties for NULL return value.
    Fix disabling of symlink incremental backups from web interface

Changes:

    Added Czech translation (thanks goes to Ales Hermann). Updated translations and updated translation attribution.
    Added systemd unit file and firewalld config file to tarball
    Disable outputting of static plugin libraries on Linux
    Added log rotation on Windows

1.4.3

Bugfixes:

    Detach settings db at a few more places to prevent web interface lock-ups

1.4.2

Changes:

    New option to disable the periodical re-adding of file entries.
    Log number of re-added and copied file entries as info
    Copy file if hard linking fails when client side hash is available
    The file tree reading and differencing was fragmenting the memory horribly on Linux (with glibc). Fixed it by making one big allocation.

Bugfixes:

    Fixed crash bug when a client is forced offline
    Don't re-add all file entries on every incremental Internet file backup.
    New option to disable the periodical re-adding of file entries.
    Properly re-add file entries from symbolically linked directories
    Get the correct "chunk hash - difference" file size for saving it into the database
    Copy file entry in proper transaction and exit before that, if another backup is running
    Properly handle error case, when hard linking fails in incremental backup
    Properly set zip files to contain UTF-8 file and directory names
    Properly handle backslashes in paths on Linux servers
    Fixed crash when not able to open server_version_info.properties for writing

1.4.1

Changes:

    Increased buffer size in chunk patcher and optimization of chunk patcher for btrfs
    New setting to verify the client side hashes on the server after the file backup
    Make clientnames case-insensitive during discovery

Bugfixes:

    Fixed null pointer dereference crash bug when stopping a backup
    Fixed a few memory leaks
    Use exec instead of system in setuid snapshot helper executable, because the system calls do not work on some Linux systems and are insecure
    Enabled FastCGI on Windows on the same port as on Linux
    Only mark statistic calculation as done if it was not interrupted
    Exclude columns from column selector if they are disabled by way of the settings (e.g. image backups completely disabled)
    Don't reset client specific disabling of file/image backups when saving

1.4

    Fixed archive window not displaying and "forever" not being allowed in some cases

1.4 RC6

    Use full interval for backup status if incremental interval is not set
    Chunk hashes transfer mode: Don't rerequest the file if it does not exist. Use the same connection after reconnection and correctly shutdown old connections on reconnect.

1.4 RC5

    Limit the number of queued file downloads according to number of file descriptors used
    Fixed null pointer dereferencing bug with the progress debug logging
    Forcibly offline client, if capabilities cannot be requested/received

1.4 RC3

    Fixed partial file downloads with Internet clients
    Set client specific local_incr_file_transfer_mode setting correctly
    Reconnect to flush queue if file does unexpectedly not exist
    Run export_auth_log as current user
    Show full auth_log.csv file path
    Properly log restore cd logins
    Debug log file loading progress every minute
    Fixed intermixing of local/internet speed when globally throttling the chunked file transfer
    Fixed table on status screen (is not in the Debian packages yet)

1.4 RC2

    Fixed issue with some mail servers and newer cURL versions

1.4 RC1

    Don't crash if file is not compressed when asked to decompress a image file
    Properly rename temporary decompressed image file after it being decompressed completely
    If backup was started from the web interface run exactly that backup type, if other backup types may be possible
    Added Norwegian web interface translation (by matsr) and Dutch web interface translation (by buzzertnl and by Pimmetje)
    Converted the "compress image backup" switch to a select box, because further image format options are planned
    Switched update download URL to http://update2.urbackup.org
    Logrotate using pidfile to prevent the logrotation from killing other urbackup_srv process instances
    Fixed potential bug with the file transfer reconnection
    Option to delete file entries with failed verification from database when verifying file backups
    Save correct file size in database with patches ("block differences - hashed" transfer mode)
    Verify filesize when verifying hashes
    Fixed bug where one of the hashes in the "block differences - hashed" transfer mode was calculated incorrectly. This caused unnecessary file blocks to be transferred during incremental file backups. Using Server 1.4RC1 with previous clients and vise versa causes even more unnecessary data to be transferred. This bug does, however, not affect file correctness.
    Add changed file to database on incremental backups if changed file can be linked via file hash

1.4 beta 2

Changes: - More extensive logging, if deleting files in snapshot or creating directories fails - Don't run post_incr/full_filebackup script if it does not exist
1.4 beta 1

Major changes:

    Web interface improvements: Sortable and paginated table for client status, ZIP file download of folders, changed the python charting to jqplot, show monthly and yearly storage usage
    Image file (VHD) compression
    New symlinking scheme during incremental file backups increasing file backup performance significantly on non-btrfs filesystems
    Improved performance of small file transfers significantly
    Server private/public key authentication

Changes:

    Don't download new server version information in the browser. Do it nightly instead.
    Post filebackup scripts on the server
    Cleanup history during nightly cleanups
    Better error handling in socket code
    Calculate file hashes on Internet client per default
    Added Slovenian web interface translation. Thanks goes to janda
    Always prepend "UrBackup: " to mail subjects
    Setting to disable the "Exit" menu item and to always connect to the internet server
    Script to decompress image
    Do not download zero sized files
    Add file entries every min_file_incr times for each file
    Don't log "too many hardlinks" errors as warnings
    Faster file backup stopping
    Changed time functions to use 64bit integers
    Added ETA estimation
    Support sub-hour/daily file/image backup intervals
    Removed downloadplugin. Replaced it with cURL.
    Added Linux version querying. Made Windows version querying more maintainable.
    Special setting to backup all volumes on Windows
    Removed skipping file backup if there was a file backup error. Exponential back off takes care of that.
    Setup web interface translations to be pulled from transifex
    Better settings exchange
    Copy over file entries from last backup when resuming backup
    Show that backups are resumed
    Added (compressed) VHD file mounting on Linux
    Do not log filelist construct connect error backups
    Parameters to configure client backend ports
    Save partial files if blockhash transfer mode is activated
    Delete incomplete file backups during cleanups (spare the last incomplete file backup)
    Automatically offline clients which are to be deleted
    Different settings if client is not allowed to overwrite client settings
    Properly calculate the progress by counting the transferred bytes (intra file progress)
    Increase buffer size for hashing
    Delete old logs if they are older than half a year
    Log web interface logins
    Larger cache size for usage graph
    Add defrag_database option
    Updated Installer to include all www files
    Removed VC 2008 redistributable
    Removed pychart
    Added defrag database app/command
    Use database cursor when verifying file backups
    Get settings from client before sending the server settings on startup
    Exponentially less backup tries on failed backup
    Changed integrity check before database backup to do a quick check
    Allow setting user via start_urbackup_server
    Added more change journal indexing logging
    Use local getopt if present
    Add user in a different way on FreeBSD
    Removed unused nullptr definition
    Fallback if getifaddrs fails

Bugfixes:

    Disable reports section if logged in anonymously
    Allow use of volume as backup folder on Windows
    Properly handle file backups with failed verification
    Use own functionality to create random file names on Windows
    Don't get server-side only settings from client
    Properly escape filenames in file list
    Properly handle " in file names (on Linux clients)
    Properly handle *?:| etc. on Windows servers
    Properly handle + in urls
    Fixed some memory leaks
    Send settings even if no settings exist on the client
    Do not retry getting settings if they did not exist
    Search for new interfaces before broadcasting
    Properly update settings
    Delete pending clients for removal during cleanup
    Use same name in MSI installer as with exe installer
    Don't try to send mail if no admin mail was configured
    Better output in snapshot_helper
    Internet client timeouts sooner if backup is running
    Fixed crash bug that crashed the server when the file cache was enabled and the server was not immediately restarted
    Retry sending "DID BACKUP" message
    Look first at PREFIX dir for backup server database
    Get PREFIX from start_backup_server path

1.3.2

Bugfixes:

    Fixed issues with multiple network interfaces on Windows
    Bug fix for crash with SQLite file cache
    Buf fix for symbolic links on Windows with samba shares
    Fixed live log threading issues (crash bug)
    Add computername to settings when downloading client
    Fixed cleanup command/script



1.3.1

Bugfixes:

    Fixed bug where the disable checkbox of the backup intervals wasn't handled correctly on the web interface
    Bugfix: Backup window changes are properly saved now
    Better logging messages when authentication fails



1.3

New features:

    Users can download a customized client installer which has server identity and authentication key for the specific client pre-set.
    New live log lets you access debug level log information and client specific log information directly from the web interface while backups are running
    Checkboxes to disable any kind of backup. Can be client specific.
    More fine grained client permissions
    Soft client quota to limit the amount of storage of each client
    Separate backup windows for incremental/full file/image backups
    Client-side hashing to prevent the retransfer of files already existing on the server (for Internet mode)
    New file entry cache which may speed up the performance with many file entries
    Access to images is password protected now, if an admin password was set (you need the Restore CD 1.1 to restore images if a password was set)
    Check for new UrBackup Server version on status screen
    Hide status column if backup method (image or file backups) is disabled
    Show client and operating system version on web interface
    Restyle: Wider tables, if necessary
    End-to-end file backup verification for debugging purposes



Bugfixes:

    Many bugfixes for deadlocks and racing conditions in connection with many clients
    Fixed severe Linux issue with many clients
    Better error messages when opening database fails
    Copy file locally if maximum hard link count was reached
    Limit stack size to 1MB on 32bit architectures
    Rethrow SEH to terminate programm on access violation
    Linux: Build hardening (stack protector)
    Fixed race condition in InternetServiceConnector
    Delete UrBackupUpdate if it failed to verify
    Properly handle UNC paths
    If a folder cannot be accessed and access to the root is gone do not delete change information
    Optimized InternetServiceConnector
    Added settings caching
    Increase number of fds in start_urbackup_server script
    Destroy database after some threads are finished to conserve memory
    Bind to all interfaces on Windows
    Only start some threads when they are needed to conserve memory
    Reset sqlite reads if necessary to prevent deadlocks
    Remove temporary file when updating (disabled per default)
    Free memory and clear Databases more often to conserve memory
    Argument for running UrBackup in gdb on Linux (--run_in_gdb)
    Improved performance of status screen
    Additional debug information, when getting bootable flag fails when discovering system reserved volume
    Refactoring and performance improvements when receiving images
    Additional wait time on unknown command on channel
    Paramter to bind UrBackup Server to a specific interface on Linux
    Replaced all select calls with poll on non-Windows systems
    Warn only once about error while reading from parent hash file during image backups
    Don't stop incremental image backups with an error if the volume size increased
    Fixed bug, where the internal file hash was calculated incorrectly with the chunked file hash transfer mode
    Added about page on web interface
    Don't allow changing the clientname if on internet connection
    Don't set ident error, if sending the identity failed because of connection issues
    Show error message on status page if the database is corrupted
    Require add_client right to add client
    Use open64 instead of open to open files for reflinking (Fixes 2GB bug)
    Proper cmd exit code returning on Windows
    Fixed saving settings if internet mode is disabled because cryptoplugin is not available
    Added boardcast_interfaces command line option to start_urbackup_server wrapper
    New right "client_settings" which when removed disables changing client settings
    Correctly check the incremental image interval for a negative value not the incremental file backup interval
    Only show calculated backup size if it was calculated completely
    Better error message when sending test mail failed
    Increased the number of reconnection retries
    Separate settings for allowing client-side starting of incremental and full backups
    Disable buttons for all backup kinds
    Cleanup and repair of the broadcasting code
    Work around for issue where last modified dates of files are not changed, if the file is changed via memory mapping
    Read proxy settings from http_proxy variable, if set
    Strip #I and # from server identity
    Improved the way UrBackup finds and selects the system reserved partition
    Fixed bug where the block difference transfer mode wasn't properly throttled in interned mode
    Fixed bug, where a disconnected (and deleted) connection was used
    Don't rollback on error when "repairing" database
    Only one client per thread for the build in http server (for simultaneous file downloads)
    Fixed bug where images were not removed during cleanup
    Show clients which use less then 5% of the backup space as "other" (when using pychart)
    Put the action links on top of the client status, if there are more than 10 clients
    Longer timeouts for internet clients
    Don't add a slash when creating junctions on Windows



1.2.4

Bugfixes:

    Fixed bug where the block difference transfer mode wasn't throttled at all with the Internet mode
    Fixed bug where a disconnected (and deleted) connection was used with the Internet mode causing a crash
    Don't rollback on error when "repairing" database
    Correctly handle compression errors with Internet clients
    Proper bandwidth throttling at low speeds
    Fixed init script status checking on Linux
    Do log hard link errors due to the file system hard link limit as debug log messages on Windows



1.2.3

Bugfixes:

    Fixed bug, where a disconnected client caused 100% CPU usage.
    Fixed: Only do cleanup max every 12 hours not as often as possible in a backup window



1.2.2

Bugfixes:

    Fixed: The Internet transfer mode (i.e., "block differences - hashed") caused a data corruption in files with a size of 0 bytes which subsequently became larger.



Changes:

    Added nice/ionice levels to init.d/defaults file
    Added database repair script



1.2.1

Bugfixes:

    Fixed: The new "hashed" transfer mode for image backups causes supsequent incremental image backups to fail if the volumes do not end a certain block boundary.



The Linux/kFreeBSD/Solaris and source code version of Server 1.2 did not include some bugfixes. Those are now included:

    Fall back to full file backups if no other file backup was found
    Internet server name/IP was not set correctly from web interface
    Only use internet server name from server if it is not empty




1.2

New features:

    Scripts to cleanup the UrBackup database and the backups
    Added log rotation on Linux
    Global soft filesystem quota
    Enabled hashed image transfer
    Added french translation of web interface. Thanks go to mehdincd
    Partial traditional and simplified chinese translation for the web interface. Thanks go to Zhengyu Ren
    Added more advanced settings
    Added statistics recalculation


Bugfixes:

    Fall back to full file backups if no other file backup was found
    Fixed crash bug when client timed out while image transfer is in progress
    Actually use temporary files for file backups if enabled
    Push settings to client after a while
    Free sqlite cache at appropriate places
    Better client discovery
    Use indicator on status page
    Added FAQ link for ident error
    Properly update the number of full/incremental images while cleaning up images
    Don't get stuck in a loop, if a backup cannot be removed during client removal
    Fixed performance problem when deleting files in database
    Fixing directory shortening for Unicode path names (appends part of a hash now)
    Properly handle long filenames on Linux server

1.1.1

Changes:

    Fixed a problem with long path names on Windows, if the temporary file buffers are disabled

1.1

New features:

    Per default UrBackup does not use files in the temporary folder as buffer anymore. Reenable this in the "Advanced" tab in settings if your main backup storage is slow and if you have enough temporary space available.
    New btrfs specific backup mode which uses snapshots and cross device reflinks See blog entry.
    Added spanish translation
    Fixed verification of image backups and added verification of file backups



Changes:

    Correctly transmit image backup errors
    Update backup intervals correctly while the server is running
    Better error handling while VHD writing and during image backups
    Additional error states and error messages
    Added warnings in the web interface about UrBackup not having enough backup space
    Use junctions instead of symlinks on Windows if available
    Fixed UrBackup such that it runs on FreeBSD
    Use CRLF instead of only LF in mail header. This fixed a problem with some mail servers
    Fixed infinite loop if the server is unable to delete a full file backup



1.0

New features (See this blog entry for details):

    New hashed transfer mode for files and images
    New Internet mode which allows backups of clients over the Internet
    Archiving of file backups
    Starting and stoping of backups in the web interface
    Allow throttling of bandwidths. Per client and global



Changes:

    Reorganized settings in the web interface into tabs
    Fixed a lot of memory leaks
    Correctly read default included files
    Correctly change the symlinks in Windows (e.g. "current") to point to the correct backup
    Better default language selection for server web interface
    Truncate file names that are too long for the server file system

0.26.1

Changes:
Added russian translation
Corrected mail sender format, which caused some mail servers to not send reports
Modified the way client-side settings overwrite server-side settings if the client did not change the settings. It also displays a warning now informing about what is happening.
Fixed window calculations if start time is larger than stop time


0.26

Changes:
Changed behaviour on hardlink error
Fixed web interface for IE8
Added include file pattern


0.25.2

Changes:
Ignode new lines in backup folder path
Allow sockets to bind to already used ports
Fixed crash in sql query

0.25.1

Changes:
Allow unicode backup path names
Speed optimizations for VHD file writing
Fixed bug where extra clients could not be removed
Fixed crash occuring with some file names in backup paths


0.25

New features:
Added mailed reports of backups
You can specifiy what client can and cannot do on the server now (start backups etc.)
Added image backup of multiple volumes capability
Optimized performance
Added server database backup
Added setting for no file backups


Bugfixes:
Change english date style to ISO
Fixed ip address printing
Allow statistics updates to be interruptible
Optimized statistics updating
Better file download restarting (Wait 300s for the client not just 8 tries)
Fixed bug which leads to too many transfered files
Better client ip change detection
Better timeout detection during file list construction
Fixed ping error on restoration
Optimized image receiving


0.24:

New features:
Create and restore the 'System Reserved' partition (Win7 + Server 2008) as well
Added cleanup time window
Sped up statistics calculation
Don't crash if temporary file directory is not accessible
Allow changing of temporary directory in Windows
Updated Makefile system for easier setup
Allow clients to be removed
Use google chart if pychart is not available (for statistics)
Allow setting the client name
New setting to exclude files via wildcards
Allow unicode share names

Bugfixes:
Fix build in Solaris
Catch exception if fcgi stream is invalid
Sanitize JSON data for html display
Fixed symbolic link on Windows
Fixed Windows service shutdown
Fixed statistics threading issues
If the directory tree files contain errors stop gracefully and fall back to a full backup
Fixed some file handle leaks
If a backup was done but failed, wait longer for a retry
Fixed bug where paths with ' in them would not be browsable
Increased statistics performance via larger cache size
Stop server if it cannot listen on the fastcgi port
Use Timeouts for queries to not stall during long updates
Do nightly cleanup at local night


Editor Site WEB :http://urbackup.sourceforge.net/

What is UrBackup?

Urbackup is a client/server backup system, that through a combination of image and file backup accomplishes both data security and a fast restoration time. Single files can be restored fast through the web interface or the Windows Explorer while the image backups can be restored with a bootable CD or USB-Stick.

Features

[*]Full and incremental image and file backups: Whole partitions can be saved as well as single directories
[*]Fast calculation of file tree differences leads to very fast incremental file backups - only new changed files will be retransmitted
[*]Only used and changed hard disk sectors are transmitted during an incremental image backup
[*]Image and file backups while the system is running
[*]Backups of used files. For example Outlook .pst files
[*]Same files on different computers are saved only once. Less server storage space is needed for your backups (file level dedublication).
[*]Fast file and image transmission
[*]Clients can change their settings like backup frequency or number of backups and can take a look at logfiles of their backups
[*]Next to no configuration. Install, select the directories you want to backup and watch it backup
[*]Client warns if there was no backup for some time
[*]Webinterface that shows the status of the clients, current activities and statistics. It allows the administrator to change backup settings and override the settings for the clients. Existing file backups can be browsed and files from these backups can be extracted.

Is my system supported?

UrBackup runs on Windows and Linux. The client currently only runs on Windows.

Do I really need a server? Why isn't my external USB drive enough?

Yes you do. Without a server your data cannot be secure. One example would be a virus that deletes your data while you are running a backup on your external hard drive. Because it is plugged in, the virus can delete both copies: The backups and the original data. If you unplug the external drive after the backup is done you may forget to plug it in for the next backup again. You should really consider investing in a backup server. Because it is both more comfortable and secure.

[Image: status_thumb.jpg] [Image: activities_thumb.jpg]
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#2
URBACKUP

Source : http://urbackup.sourceforge.net/


Link :

http://www.positiv-it.fr/thecus/download....0_x86.rar

http://www.positiv-it.fr/thecus/download....0_x64.rar

PPC Version http://www.positiv-it.fr/thecus/download....0_PPC.rar
X86 Version http://www.positiv-it.fr/thecus/download....0_x86.rar
X64 Version http://www.positiv-it.fr/thecus/download....0_x64.rar

[ Current Release ] [ Upgrade not compatible, thanks to make a clean reinstall ]

PPC Version http://www.positiv-it.fr/thecus/download....0_ppc.rar
X86 Version http://www.positiv-it.fr/thecus/download....0_x86.rar
X64 Version http://www.positiv-it.fr/thecus/download....0_x64.rar


[ Previous Version ]

PPC Version http://www.positiv-it.fr/thecus/download....0_ppc.rar [BETA]
X86 Version OS5 http://www.positiv-it.fr/thecus/download....0_x86.rar
X86 Version OS6 http://www.positiv-it.fr/thecus/download...86_OS6.rar
X64 Version http://www.positiv-it.fr/thecus/download....0_x64.rar

PPC Version http://www.positiv-it.fr/thecus/download....0_ppc.rar [BETA BUT WORKING]
X86 Version OS5 http://www.positiv-it.fr/thecus/download...-OS5-6.rar
X86 Version OS6 http://www.positiv-it.fr/thecus/download...-OS5-6.rar
X64 Version http://www.positiv-it.fr/thecus/download....5_x64.rar

[ Current Version ]

PPC Version http://www.positiv-it.fr/thecus/download....0_ppc.rar [BETA BUT WORKING]
X86 Version OS5 http://www.positiv-it.fr/thecus/download...-OS5-6.rar
X86 Version OS6 http://www.positiv-it.fr/thecus/download...-OS5-6.rar
X64 Version http://www.positiv-it.fr/thecus/download....6_x64.rar

ChangeLog :
Code:
1.4.6

Bugfixes:

    Keep session alive as long as channel is alive to fix crash bug when restoring an image backup with accompanying system reserved partition and with required login
    Extended query to filter by clientid when accessing backups. Did not cause security issue, because filesystem access uses the clientname
    Allow "ALL" and "ALL_NONUSB" as special image backup values on web interface
    Nice explanation in case of compression error on NTFS (ERROR_FILE_SYSTEM_LIMITATION)


1.4.5

Critical Bugfixes:

    Always use separate connection to download blocks with wrong hashes, because the patch file format requires the data in ascending order. This rarely causes corrupted files in file backups if the 'block differences' transfer mode is used.

Bugfixes:

    Get allow_overwrite from global settings if local settings are not enabled
    Properly propagate global setting changes to client settings
    Update capabilities after client update
    Fixed log rotation
    Use execvp instead of execvpe in snapshot helper to fix compile errors on some platforms
    Try to automatically set the /etc/urbackup/backupfolder file (in case urbackup is run as root)
    Fixed switching of client from Internet to LAN
    Added assertions and error logging if patch is corrupt
    Fixed big endian issues with file backups
    Fixed wrong file data, if reflinking file fails on btrfs
    Only output warning message if symlinked directory is not found in database
    Continue after reading from base file failed in "block hash differences" transfer mode
    Fixed infinite loop in quota enforcement if deleting image fails

Changes:

    New value "ALL_NONUSB" for volumes to backup to back up all volumes which are not on an usb disk


1.4.4

Bugfixes:

    Fix ' being escaped in settings entered through the web interface
    Better logging if temporary file cannot be created, and create temporary directory if it was created.
    Check snapshot properties for NULL return value.
    Fix disabling of symlink incremental backups from web interface

Changes:

    Added Czech translation (thanks goes to Ales Hermann). Updated translations and updated translation attribution.
    Added systemd unit file and firewalld config file to tarball
    Disable outputting of static plugin libraries on Linux
    Added log rotation on Windows

1.4.3

Bugfixes:

    Detach settings db at a few more places to prevent web interface lock-ups

1.4.2

Changes:

    New option to disable the periodical re-adding of file entries.
    Log number of re-added and copied file entries as info
    Copy file if hard linking fails when client side hash is available
    The file tree reading and differencing was fragmenting the memory horribly on Linux (with glibc). Fixed it by making one big allocation.

Bugfixes:

    Fixed crash bug when a client is forced offline
    Don't re-add all file entries on every incremental Internet file backup.
    New option to disable the periodical re-adding of file entries.
    Properly re-add file entries from symbolically linked directories
    Get the correct "chunk hash - difference" file size for saving it into the database
    Copy file entry in proper transaction and exit before that, if another backup is running
    Properly handle error case, when hard linking fails in incremental backup
    Properly set zip files to contain UTF-8 file and directory names
    Properly handle backslashes in paths on Linux servers
    Fixed crash when not able to open server_version_info.properties for writing

1.4.1

Changes:

    Increased buffer size in chunk patcher and optimization of chunk patcher for btrfs
    New setting to verify the client side hashes on the server after the file backup
    Make clientnames case-insensitive during discovery

Bugfixes:

    Fixed null pointer dereference crash bug when stopping a backup
    Fixed a few memory leaks
    Use exec instead of system in setuid snapshot helper executable, because the system calls do not work on some Linux systems and are insecure
    Enabled FastCGI on Windows on the same port as on Linux
    Only mark statistic calculation as done if it was not interrupted
    Exclude columns from column selector if they are disabled by way of the settings (e.g. image backups completely disabled)
    Don't reset client specific disabling of file/image backups when saving

1.4

    Fixed archive window not displaying and "forever" not being allowed in some cases

1.4 RC6

    Use full interval for backup status if incremental interval is not set
    Chunk hashes transfer mode: Don't rerequest the file if it does not exist. Use the same connection after reconnection and correctly shutdown old connections on reconnect.

1.4 RC5

    Limit the number of queued file downloads according to number of file descriptors used
    Fixed null pointer dereferencing bug with the progress debug logging
    Forcibly offline client, if capabilities cannot be requested/received

1.4 RC3

    Fixed partial file downloads with Internet clients
    Set client specific local_incr_file_transfer_mode setting correctly
    Reconnect to flush queue if file does unexpectedly not exist
    Run export_auth_log as current user
    Show full auth_log.csv file path
    Properly log restore cd logins
    Debug log file loading progress every minute
    Fixed intermixing of local/internet speed when globally throttling the chunked file transfer
    Fixed table on status screen (is not in the Debian packages yet)

1.4 RC2

    Fixed issue with some mail servers and newer cURL versions

1.4 RC1

    Don't crash if file is not compressed when asked to decompress a image file
    Properly rename temporary decompressed image file after it being decompressed completely
    If backup was started from the web interface run exactly that backup type, if other backup types may be possible
    Added Norwegian web interface translation (by matsr) and Dutch web interface translation (by buzzertnl and by Pimmetje)
    Converted the "compress image backup" switch to a select box, because further image format options are planned
    Switched update download URL to http://update2.urbackup.org
    Logrotate using pidfile to prevent the logrotation from killing other urbackup_srv process instances
    Fixed potential bug with the file transfer reconnection
    Option to delete file entries with failed verification from database when verifying file backups
    Save correct file size in database with patches ("block differences - hashed" transfer mode)
    Verify filesize when verifying hashes
    Fixed bug where one of the hashes in the "block differences - hashed" transfer mode was calculated incorrectly. This caused unnecessary file blocks to be transferred during incremental file backups. Using Server 1.4RC1 with previous clients and vise versa causes even more unnecessary data to be transferred. This bug does, however, not affect file correctness.
    Add changed file to database on incremental backups if changed file can be linked via file hash

1.4 beta 2

Changes: - More extensive logging, if deleting files in snapshot or creating directories fails - Don't run post_incr/full_filebackup script if it does not exist
1.4 beta 1

Major changes:

    Web interface improvements: Sortable and paginated table for client status, ZIP file download of folders, changed the python charting to jqplot, show monthly and yearly storage usage
    Image file (VHD) compression
    New symlinking scheme during incremental file backups increasing file backup performance significantly on non-btrfs filesystems
    Improved performance of small file transfers significantly
    Server private/public key authentication

Changes:

    Don't download new server version information in the browser. Do it nightly instead.
    Post filebackup scripts on the server
    Cleanup history during nightly cleanups
    Better error handling in socket code
    Calculate file hashes on Internet client per default
    Added Slovenian web interface translation. Thanks goes to janda
    Always prepend "UrBackup: " to mail subjects
    Setting to disable the "Exit" menu item and to always connect to the internet server
    Script to decompress image
    Do not download zero sized files
    Add file entries every min_file_incr times for each file
    Don't log "too many hardlinks" errors as warnings
    Faster file backup stopping
    Changed time functions to use 64bit integers
    Added ETA estimation
    Support sub-hour/daily file/image backup intervals
    Removed downloadplugin. Replaced it with cURL.
    Added Linux version querying. Made Windows version querying more maintainable.
    Special setting to backup all volumes on Windows
    Removed skipping file backup if there was a file backup error. Exponential back off takes care of that.
    Setup web interface translations to be pulled from transifex
    Better settings exchange
    Copy over file entries from last backup when resuming backup
    Show that backups are resumed
    Added (compressed) VHD file mounting on Linux
    Do not log filelist construct connect error backups
    Parameters to configure client backend ports
    Save partial files if blockhash transfer mode is activated
    Delete incomplete file backups during cleanups (spare the last incomplete file backup)
    Automatically offline clients which are to be deleted
    Different settings if client is not allowed to overwrite client settings
    Properly calculate the progress by counting the transferred bytes (intra file progress)
    Increase buffer size for hashing
    Delete old logs if they are older than half a year
    Log web interface logins
    Larger cache size for usage graph
    Add defrag_database option
    Updated Installer to include all www files
    Removed VC 2008 redistributable
    Removed pychart
    Added defrag database app/command
    Use database cursor when verifying file backups
    Get settings from client before sending the server settings on startup
    Exponentially less backup tries on failed backup
    Changed integrity check before database backup to do a quick check
    Allow setting user via start_urbackup_server
    Added more change journal indexing logging
    Use local getopt if present
    Add user in a different way on FreeBSD
    Removed unused nullptr definition
    Fallback if getifaddrs fails

Bugfixes:

    Disable reports section if logged in anonymously
    Allow use of volume as backup folder on Windows
    Properly handle file backups with failed verification
    Use own functionality to create random file names on Windows
    Don't get server-side only settings from client
    Properly escape filenames in file list
    Properly handle " in file names (on Linux clients)
    Properly handle *?:| etc. on Windows servers
    Properly handle + in urls
    Fixed some memory leaks
    Send settings even if no settings exist on the client
    Do not retry getting settings if they did not exist
    Search for new interfaces before broadcasting
    Properly update settings
    Delete pending clients for removal during cleanup
    Use same name in MSI installer as with exe installer
    Don't try to send mail if no admin mail was configured
    Better output in snapshot_helper
    Internet client timeouts sooner if backup is running
    Fixed crash bug that crashed the server when the file cache was enabled and the server was not immediately restarted
    Retry sending "DID BACKUP" message
    Look first at PREFIX dir for backup server database
    Get PREFIX from start_backup_server path

1.3.2

Bugfixes:

    Fixed issues with multiple network interfaces on Windows
    Bug fix for crash with SQLite file cache
    Buf fix for symbolic links on Windows with samba shares
    Fixed live log threading issues (crash bug)
    Add computername to settings when downloading client
    Fixed cleanup command/script



1.3.1

Bugfixes:

    Fixed bug where the disable checkbox of the backup intervals wasn't handled correctly on the web interface
    Bugfix: Backup window changes are properly saved now
    Better logging messages when authentication fails



1.3

New features:

    Users can download a customized client installer which has server identity and authentication key for the specific client pre-set.
    New live log lets you access debug level log information and client specific log information directly from the web interface while backups are running
    Checkboxes to disable any kind of backup. Can be client specific.
    More fine grained client permissions
    Soft client quota to limit the amount of storage of each client
    Separate backup windows for incremental/full file/image backups
    Client-side hashing to prevent the retransfer of files already existing on the server (for Internet mode)
    New file entry cache which may speed up the performance with many file entries
    Access to images is password protected now, if an admin password was set (you need the Restore CD 1.1 to restore images if a password was set)
    Check for new UrBackup Server version on status screen
    Hide status column if backup method (image or file backups) is disabled
    Show client and operating system version on web interface
    Restyle: Wider tables, if necessary
    End-to-end file backup verification for debugging purposes



Bugfixes:

    Many bugfixes for deadlocks and racing conditions in connection with many clients
    Fixed severe Linux issue with many clients
    Better error messages when opening database fails
    Copy file locally if maximum hard link count was reached
    Limit stack size to 1MB on 32bit architectures
    Rethrow SEH to terminate programm on access violation
    Linux: Build hardening (stack protector)
    Fixed race condition in InternetServiceConnector
    Delete UrBackupUpdate if it failed to verify
    Properly handle UNC paths
    If a folder cannot be accessed and access to the root is gone do not delete change information
    Optimized InternetServiceConnector
    Added settings caching
    Increase number of fds in start_urbackup_server script
    Destroy database after some threads are finished to conserve memory
    Bind to all interfaces on Windows
    Only start some threads when they are needed to conserve memory
    Reset sqlite reads if necessary to prevent deadlocks
    Remove temporary file when updating (disabled per default)
    Free memory and clear Databases more often to conserve memory
    Argument for running UrBackup in gdb on Linux (--run_in_gdb)
    Improved performance of status screen
    Additional debug information, when getting bootable flag fails when discovering system reserved volume
    Refactoring and performance improvements when receiving images
    Additional wait time on unknown command on channel
    Paramter to bind UrBackup Server to a specific interface on Linux
    Replaced all select calls with poll on non-Windows systems
    Warn only once about error while reading from parent hash file during image backups
    Don't stop incremental image backups with an error if the volume size increased
    Fixed bug, where the internal file hash was calculated incorrectly with the chunked file hash transfer mode
    Added about page on web interface
    Don't allow changing the clientname if on internet connection
    Don't set ident error, if sending the identity failed because of connection issues
    Show error message on status page if the database is corrupted
    Require add_client right to add client
    Use open64 instead of open to open files for reflinking (Fixes 2GB bug)
    Proper cmd exit code returning on Windows
    Fixed saving settings if internet mode is disabled because cryptoplugin is not available
    Added boardcast_interfaces command line option to start_urbackup_server wrapper
    New right "client_settings" which when removed disables changing client settings
    Correctly check the incremental image interval for a negative value not the incremental file backup interval
    Only show calculated backup size if it was calculated completely
    Better error message when sending test mail failed
    Increased the number of reconnection retries
    Separate settings for allowing client-side starting of incremental and full backups
    Disable buttons for all backup kinds
    Cleanup and repair of the broadcasting code
    Work around for issue where last modified dates of files are not changed, if the file is changed via memory mapping
    Read proxy settings from http_proxy variable, if set
    Strip #I and # from server identity
    Improved the way UrBackup finds and selects the system reserved partition
    Fixed bug where the block difference transfer mode wasn't properly throttled in interned mode
    Fixed bug, where a disconnected (and deleted) connection was used
    Don't rollback on error when "repairing" database
    Only one client per thread for the build in http server (for simultaneous file downloads)
    Fixed bug where images were not removed during cleanup
    Show clients which use less then 5% of the backup space as "other" (when using pychart)
    Put the action links on top of the client status, if there are more than 10 clients
    Longer timeouts for internet clients
    Don't add a slash when creating junctions on Windows



1.2.4

Bugfixes:

    Fixed bug where the block difference transfer mode wasn't throttled at all with the Internet mode
    Fixed bug where a disconnected (and deleted) connection was used with the Internet mode causing a crash
    Don't rollback on error when "repairing" database
    Correctly handle compression errors with Internet clients
    Proper bandwidth throttling at low speeds
    Fixed init script status checking on Linux
    Do log hard link errors due to the file system hard link limit as debug log messages on Windows



1.2.3

Bugfixes:

    Fixed bug, where a disconnected client caused 100% CPU usage.
    Fixed: Only do cleanup max every 12 hours not as often as possible in a backup window



1.2.2

Bugfixes:

    Fixed: The Internet transfer mode (i.e., "block differences - hashed") caused a data corruption in files with a size of 0 bytes which subsequently became larger.



Changes:

    Added nice/ionice levels to init.d/defaults file
    Added database repair script



1.2.1

Bugfixes:

    Fixed: The new "hashed" transfer mode for image backups causes supsequent incremental image backups to fail if the volumes do not end a certain block boundary.



The Linux/kFreeBSD/Solaris and source code version of Server 1.2 did not include some bugfixes. Those are now included:

    Fall back to full file backups if no other file backup was found
    Internet server name/IP was not set correctly from web interface
    Only use internet server name from server if it is not empty




1.2

New features:

    Scripts to cleanup the UrBackup database and the backups
    Added log rotation on Linux
    Global soft filesystem quota
    Enabled hashed image transfer
    Added french translation of web interface. Thanks go to mehdincd
    Partial traditional and simplified chinese translation for the web interface. Thanks go to Zhengyu Ren
    Added more advanced settings
    Added statistics recalculation


Bugfixes:

    Fall back to full file backups if no other file backup was found
    Fixed crash bug when client timed out while image transfer is in progress
    Actually use temporary files for file backups if enabled
    Push settings to client after a while
    Free sqlite cache at appropriate places
    Better client discovery
    Use indicator on status page
    Added FAQ link for ident error
    Properly update the number of full/incremental images while cleaning up images
    Don't get stuck in a loop, if a backup cannot be removed during client removal
    Fixed performance problem when deleting files in database
    Fixing directory shortening for Unicode path names (appends part of a hash now)
    Properly handle long filenames on Linux server

1.1.1

Changes:

    Fixed a problem with long path names on Windows, if the temporary file buffers are disabled

1.1

New features:

    Per default UrBackup does not use files in the temporary folder as buffer anymore. Reenable this in the "Advanced" tab in settings if your main backup storage is slow and if you have enough temporary space available.
    New btrfs specific backup mode which uses snapshots and cross device reflinks See blog entry.
    Added spanish translation
    Fixed verification of image backups and added verification of file backups



Changes:

    Correctly transmit image backup errors
    Update backup intervals correctly while the server is running
    Better error handling while VHD writing and during image backups
    Additional error states and error messages
    Added warnings in the web interface about UrBackup not having enough backup space
    Use junctions instead of symlinks on Windows if available
    Fixed UrBackup such that it runs on FreeBSD
    Use CRLF instead of only LF in mail header. This fixed a problem with some mail servers
    Fixed infinite loop if the server is unable to delete a full file backup



1.0

New features (See this blog entry for details):

    New hashed transfer mode for files and images
    New Internet mode which allows backups of clients over the Internet
    Archiving of file backups
    Starting and stoping of backups in the web interface
    Allow throttling of bandwidths. Per client and global



Changes:

    Reorganized settings in the web interface into tabs
    Fixed a lot of memory leaks
    Correctly read default included files
    Correctly change the symlinks in Windows (e.g. "current") to point to the correct backup
    Better default language selection for server web interface
    Truncate file names that are too long for the server file system

0.26.1

Changes:
Added russian translation
Corrected mail sender format, which caused some mail servers to not send reports
Modified the way client-side settings overwrite server-side settings if the client did not change the settings. It also displays a warning now informing about what is happening.
Fixed window calculations if start time is larger than stop time


0.26

Changes:
Changed behaviour on hardlink error
Fixed web interface for IE8
Added include file pattern


0.25.2

Changes:
Ignode new lines in backup folder path
Allow sockets to bind to already used ports
Fixed crash in sql query

0.25.1

Changes:
Allow unicode backup path names
Speed optimizations for VHD file writing
Fixed bug where extra clients could not be removed
Fixed crash occuring with some file names in backup paths


0.25

New features:
Added mailed reports of backups
You can specifiy what client can and cannot do on the server now (start backups etc.)
Added image backup of multiple volumes capability
Optimized performance
Added server database backup
Added setting for no file backups


Bugfixes:
Change english date style to ISO
Fixed ip address printing
Allow statistics updates to be interruptible
Optimized statistics updating
Better file download restarting (Wait 300s for the client not just 8 tries)
Fixed bug which leads to too many transfered files
Better client ip change detection
Better timeout detection during file list construction
Fixed ping error on restoration
Optimized image receiving


0.24:

New features:
Create and restore the 'System Reserved' partition (Win7 + Server 2008) as well
Added cleanup time window
Sped up statistics calculation
Don't crash if temporary file directory is not accessible
Allow changing of temporary directory in Windows
Updated Makefile system for easier setup
Allow clients to be removed
Use google chart if pychart is not available (for statistics)
Allow setting the client name
New setting to exclude files via wildcards
Allow unicode share names

Bugfixes:
Fix build in Solaris
Catch exception if fcgi stream is invalid
Sanitize JSON data for html display
Fixed symbolic link on Windows
Fixed Windows service shutdown
Fixed statistics threading issues
If the directory tree files contain errors stop gracefully and fall back to a full backup
Fixed some file handle leaks
If a backup was done but failed, wait longer for a retry
Fixed bug where paths with ' in them would not be browsable
Increased statistics performance via larger cache size
Stop server if it cannot listen on the fastcgi port
Use Timeouts for queries to not stall during long updates
Do nightly cleanup at local night


Editor Site WEB :http://urbackup.sourceforge.net/

What is UrBackup?

Urbackup is a client/server backup system, that through a combination of image and file backup accomplishes both data security and a fast restoration time. Single files can be restored fast through the web interface or the Windows Explorer while the image backups can be restored with a bootable CD or USB-Stick.

Features

[*]Full and incremental image and file backups: Whole partitions can be saved as well as single directories
[*]Fast calculation of file tree differences leads to very fast incremental file backups - only new changed files will be retransmitted
[*]Only used and changed hard disk sectors are transmitted during an incremental image backup
[*]Image and file backups while the system is running
[*]Backups of used files. For example Outlook .pst files
[*]Same files on different computers are saved only once. Less server storage space is needed for your backups (file level dedublication).
[*]Fast file and image transmission
[*]Clients can change their settings like backup frequency or number of backups and can take a look at logfiles of their backups
[*]Next to no configuration. Install, select the directories you want to backup and watch it backup
[*]Client warns if there was no backup for some time
[*]Webinterface that shows the status of the clients, current activities and statistics. It allows the administrator to change backup settings and override the settings for the clients. Existing file backups can be browsed and files from these backups can be extracted.

Is my system supported?

UrBackup runs on Windows and Linux. The client currently only runs on Windows.

Do I really need a server? Why isn't my external USB drive enough?

Yes you do. Without a server your data cannot be secure. One example would be a virus that deletes your data while you are running a backup on your external hard drive. Because it is plugged in, the virus can delete both copies: The backups and the original data. If you unplug the external drive after the backup is done you may forget to plug it in for the next backup again. You should really consider investing in a backup server. Because it is both more comfortable and secure.

[Image: status_thumb.jpg] [Image: activities_thumb.jpg]
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#3
Documentation :

http://www.urbackup.org/ServerAdminGuide-v0.24.pdf

Download Page for client side :

http://www.urbackup.org/Download.php?lang=en

For your Storage Path : create Share on Thecus and path will be /raid/data/share_name
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#4
Documentation :

http://www.urbackup.org/ServerAdminGuide-v0.24.pdf

Download Page for client side :

http://www.urbackup.org/Download.php?lang=en

For your Storage Path : create Share on Thecus and path will be /raid/data/share_name
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#5
Many thanks for your hard work Qoolbox.

Do you think this would be worthwhile using rather than the Windows 7's built in windows backup tool?
Thecus N5200XXX
Reply
#6
Many thanks for your hard work Qoolbox.

Do you think this would be worthwhile using rather than the Windows 7's built in windows backup tool?
Thecus N5200XXX
Reply
#7
Hi Mechjman,

I cannot answer as i didnt yet test it... :mrgreen:

May be on Monday at office, i could go more deeply in it...

Windows 7 backup seems very handly and easy way to make automated baremetal backup, but i think WIM thought Network are limited in size.. if I remember Well !!!
UrBackup can be a good alternative, as there is no container limitation as Windows WIM...

Waiting some users experiences feedback...

Cheers,
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#8
Hi Mechjman,

I cannot answer as i didnt yet test it... :mrgreen:

May be on Monday at office, i could go more deeply in it...

Windows 7 backup seems very handly and easy way to make automated baremetal backup, but i think WIM thought Network are limited in size.. if I remember Well !!!
UrBackup can be a good alternative, as there is no container limitation as Windows WIM...

Waiting some users experiences feedback...

Cheers,
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#9
I was wondering, can this Backup Module be loaded into the module section of my Thecus n8900 to act as a backup method between my internal Thecus drives and my external USB3.0? I know under the modules section, there is a module for this...but it is very basic, it works very well, but it does not appear to really do incremental backups...at least from the point that I can access something specifically from a certain day. Please let me know...thank you.
Reply
#10
Sneffets Wrote:I was wondering, can this Backup Module be loaded into the module section of my Thecus n8900 to act as a backup method between my internal Thecus drives and my external USB3.0? I know under the modules section, there is a module for this...but it is very basic, it works very well, but it does not appear to really do incremental backups...at least from the point that I can access something specifically from a certain day. Please let me know...thank you.

did you try install it on your N8900 ?
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#11
Updated 0.24 to 0.25.1
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#12
Updated 0.25.1 > 0.26.1

Code:
0.26.1

Changes:
Added russian translation
Corrected mail sender format, which caused some mail servers to not send reports
Modified the way client-side settings overwrite server-side settings if the client did not change the settings. It also displays a warning now informing about what is happening.
Fixed window calculations if start time is larger than stop time


0.26

Changes:
Changed behaviour on hardlink error
Fixed web interface for IE8
Added include file pattern


0.25.2

Changes:
Ignode new lines in backup folder path
Allow sockets to bind to already used ports
Fixed crash in sql query
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#13
Updated 0.25.1 > 0.26.1

Code:
0.26.1

Changes:
Added russian translation
Corrected mail sender format, which caused some mail servers to not send reports
Modified the way client-side settings overwrite server-side settings if the client did not change the settings. It also displays a warning now informing about what is happening.
Fixed window calculations if start time is larger than stop time


0.26

Changes:
Changed behaviour on hardlink error
Fixed web interface for IE8
Added include file pattern


0.25.2

Changes:
Ignode new lines in backup folder path
Allow sockets to bind to already used ports
Fixed crash in sql query
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#14
just a little script fix in 26.1.1
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#15
updated to 1.1 Wink
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [ UrBackup ] Client/server backup system outkastm 43 25,797 01-07-2019, 06:36 AM
Last Post: outkastm
  [ UrBackup x64 ] [ 1.1.0 ] Backup Server Qoolbox 3 4,096 02-18-2013, 10:49 PM
Last Post: Qoolbox
  [ UrBackup x64 ] [ 1.1.0 ] Backup Server 0 2,296 Less than 1 minute ago
Last Post:

Forum Jump:


Users browsing this thread: 1 Guest(s)