Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[ BackupPC ] [ 3.3.0.2 ] Enterprise-grade Backup System
#1
[Image: logo.gif]

Source : http://backuppc.sourceforge.net/

BackupPC V3.2.1 (OLD x86)

http://www.thecus-france.com/BackupPC3.2.1.rar

1 ) install Perl Fajo Module http://www.fajo.de/main/thecus/modules/perl514
2 ) install BackupPC Mod

[ Previous Release ]

x64 version : http://www.thecus-france.com/BackupPC_3.3.0.1_x64.rar
X86 OS5 Version : http://www.thecus-france.com/BackupPC_3.3.0.1_x86.rar
X86 OS6 Version : http://www.thecus-france.com/BackupPC_3....86_OS6.rar
PPC Version : http://www.thecus-france.com/BackupPC_3.3.0.1_PPC.rar

[ Current Release ] [ File::Listing perl module added ]

x64 version : http://www.thecus-france.com/BackupPC_3.3.0.2_x64.rar
X86 OS5 Version : http://www.thecus-france.com/BackupPC_3.3.0.2_x86.rar
X86 OS6 Version : http://www.thecus-france.com/BackupPC_3....86_OS6.rar
PPC Version : http://www.thecus-france.com/BackupPC_3.3.0.2_PPC.rar

Dependency :

Apache 2.2.27.2

Note :

Log into WEB Interface : <nas_ip>:12014/BackupPC

User : root
Pass : backuppc

Configuration file :

config.pl and hosts are located in /raid/data/module/BackupPC/sys/etc/BackupPC

Repository for backuped files are in /raid/data/BackupPC_DATA (created automaticly on module setup) [ Create the share to acces files ]

Introduction

BackupPC is a high-performance, enterprise-grade system for backing up Linux and WinXX PCs and laptops to a server's disk. BackupPC is highly configurable and easy to install and maintain.

Given the ever decreasing cost of disks and raid systems, it is now practical and cost effective to backup a large number of machines onto a server's local disk or network storage. This is what BackupPC does. For some sites, this might be the complete backup solution. For other sites, additional permanent archives could be created by periodically backing up the server to tape. A variety of Open Source systems are available for doing backup to tape.

BackupPC is written in Perl and extracts backup data via SMB using Samba, tar over ssh/rsh/nfs, or rsync. It is robust, reliable, well documented and freely available as Open Source on SourceForge.

BackupPC Features

  • A clever pooling scheme minimizes disk storage and disk I/O. Identical files across multiple backups of the same or different PCs are stored only once resulting in substantial savings in disk storage and disk I/O.
  • One example of disk use: 95 latops with each full backup averaging 3.6GB each, and each incremental averaging about 0.3GB. Storing three weekly full backups and six incremental backups per laptop is around 1200GB of raw data, but because of pooling and compression only 150GB is needed.
  • Optional compression support further reducing disk storage. Since only new files (not already pooled) need to be compressed, there is only a modest impact on CPU time.
  • No client-side software is needed. The standard smb protocol is used to extract backup data on WinXX clients. On linux clients, tar over ssh/rsh/nfs is used to backup the data. With version 2.0.0, rsync is also supported on any client that has rsync or rysncd.
  • A powerful web (http/cgi) user interface allows administrators to view log files, configuration, current status and allows users to initiate and cancel backups and browse and restore files from backups.
  • A full set of restore options is supported, including direct restore (via smbclient, tar, or rsync/rsyncd) or downloading a zip or tar file.
  • Supports mobile environments where laptops are only intermittently connected to the network and have dynamic IP addresses (DHCP).
  • Flexible configuration parameters allow multiple backups to be performed in parallel, specification of which shares to backup, which directories to backup or not backup, various schedules for full and incremental backups, schedules for email reminders to users and so on. Configuration parameters can be set system-wide or also on a per-PC basis.
  • Users are sent periodic email reminders if their PC has not recently been backed up. Email content, timing and policies are configurable.
  • Tested on Linux, Freenix and Solaris hosts, and Linux, Win95, Win98, Win2000 and WinXP clients.
  • Detailed documentation.
  • Open Source hosted by SourceForge and freely availble under GPL.

[Image: BackupPCServerStatus.png]

[Image: BackupPCServerSummary.png]
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#2
[Image: logo.gif]

Source : http://backuppc.sourceforge.net/

BackupPC V3.2.1 (OLD x86)

http://www.thecus-france.com/BackupPC3.2.1.rar

1 ) install Perl Fajo Module http://www.fajo.de/main/thecus/modules/perl514
2 ) install BackupPC Mod

[ Previous Release ]

x64 version : http://www.thecus-france.com/BackupPC_3.3.0.1_x64.rar
X86 OS5 Version : http://www.thecus-france.com/BackupPC_3.3.0.1_x86.rar
X86 OS6 Version : http://www.thecus-france.com/BackupPC_3....86_OS6.rar
PPC Version : http://www.thecus-france.com/BackupPC_3.3.0.1_PPC.rar

[ Current Release ] [ File::Listing perl module added ]

x64 version : http://www.thecus-france.com/BackupPC_3.3.0.2_x64.rar
X86 OS5 Version : http://www.thecus-france.com/BackupPC_3.3.0.2_x86.rar
X86 OS6 Version : http://www.thecus-france.com/BackupPC_3....86_OS6.rar
PPC Version : http://www.thecus-france.com/BackupPC_3.3.0.2_PPC.rar

Dependency :

Apache 2.2.27.2

Note :

Log into WEB Interface : <nas_ip>:12014/BackupPC

User : root
Pass : backuppc

Configuration file :

config.pl and hosts are located in /raid/data/module/BackupPC/sys/etc/BackupPC

Repository for backuped files are in /raid/data/BackupPC_DATA (created automaticly on module setup) [ Create the share to acces files ]

Introduction

BackupPC is a high-performance, enterprise-grade system for backing up Linux and WinXX PCs and laptops to a server's disk. BackupPC is highly configurable and easy to install and maintain.

Given the ever decreasing cost of disks and raid systems, it is now practical and cost effective to backup a large number of machines onto a server's local disk or network storage. This is what BackupPC does. For some sites, this might be the complete backup solution. For other sites, additional permanent archives could be created by periodically backing up the server to tape. A variety of Open Source systems are available for doing backup to tape.

BackupPC is written in Perl and extracts backup data via SMB using Samba, tar over ssh/rsh/nfs, or rsync. It is robust, reliable, well documented and freely available as Open Source on SourceForge.

BackupPC Features

  • A clever pooling scheme minimizes disk storage and disk I/O. Identical files across multiple backups of the same or different PCs are stored only once resulting in substantial savings in disk storage and disk I/O.
  • One example of disk use: 95 latops with each full backup averaging 3.6GB each, and each incremental averaging about 0.3GB. Storing three weekly full backups and six incremental backups per laptop is around 1200GB of raw data, but because of pooling and compression only 150GB is needed.
  • Optional compression support further reducing disk storage. Since only new files (not already pooled) need to be compressed, there is only a modest impact on CPU time.
  • No client-side software is needed. The standard smb protocol is used to extract backup data on WinXX clients. On linux clients, tar over ssh/rsh/nfs is used to backup the data. With version 2.0.0, rsync is also supported on any client that has rsync or rysncd.
  • A powerful web (http/cgi) user interface allows administrators to view log files, configuration, current status and allows users to initiate and cancel backups and browse and restore files from backups.
  • A full set of restore options is supported, including direct restore (via smbclient, tar, or rsync/rsyncd) or downloading a zip or tar file.
  • Supports mobile environments where laptops are only intermittently connected to the network and have dynamic IP addresses (DHCP).
  • Flexible configuration parameters allow multiple backups to be performed in parallel, specification of which shares to backup, which directories to backup or not backup, various schedules for full and incremental backups, schedules for email reminders to users and so on. Configuration parameters can be set system-wide or also on a per-PC basis.
  • Users are sent periodic email reminders if their PC has not recently been backed up. Email content, timing and policies are configurable.
  • Tested on Linux, Freenix and Solaris hosts, and Linux, Win95, Win98, Win2000 and WinXP clients.
  • Detailed documentation.
  • Open Source hosted by SourceForge and freely availble under GPL.

[Image: BackupPCServerStatus.png]

[Image: BackupPCServerSummary.png]
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#3
Hi Stephane,

Sounds like a great module...

I do have a question though: I notice Windows Vista & Windows 7 are missing in the list...

Does that mean they don't work at all?

Thanks!

Fred
Thecus N7700Pro (FW 5.01.04)
7 x 3TB Hitachi HDS5C3030ALA630 CoolSpin Drives (FW MEAO) in RAID6
EXT4 formatted with 4096 KB Blocksize
Windows 7 (x64)
Reply
#4
Hi Stephane,

Sounds like a great module...

I do have a question though: I notice Windows Vista & Windows 7 are missing in the list...

Does that mean they don't work at all?

Thanks!

Fred
Thecus N7700Pro (FW 5.01.04)
7 x 3TB Hitachi HDS5C3030ALA630 CoolSpin Drives (FW MEAO) in RAID6
EXT4 formatted with 4096 KB Blocksize
Windows 7 (x64)
Reply
#5
I guess, it should work if you can access to administatriv share c$ d$....

:mrgreen:
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#6
I guess, it should work if you can access to administatriv share c$ d$....

:mrgreen:
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#7
If you're backing up files that are in use in Windows you'll want to look into setting it up with cygwin sshd/rsync so that you can launch an ssh pre-backup command to enable VSS copies (and post-command to disable it).

See here: <!-- m --><a class="postlink" href="http://sourceforge.net/apps/mediawiki/backuppc/index.php?title=User_Scripts_-_Client_-_Windows_VSS">http://sourceforge.net/apps/mediawiki/b ... indows_VSS</a><!-- m -->

Even then it's not suitable to restore the entire drive over the top of a Windows installation. It's really a data only backup solution.
Reply
#8
If you're backing up files that are in use in Windows you'll want to look into setting it up with cygwin sshd/rsync so that you can launch an ssh pre-backup command to enable VSS copies (and post-command to disable it).

See here: <!-- m --><a class="postlink" href="http://sourceforge.net/apps/mediawiki/backuppc/index.php?title=User_Scripts_-_Client_-_Windows_VSS">http://sourceforge.net/apps/mediawiki/b ... indows_VSS</a><!-- m -->

Even then it's not suitable to restore the entire drive over the top of a Windows installation. It's really a data only backup solution.
Reply
#9
Hello,

Any news of the module, the link to download it is died :/

Thanks
Reply
#10
Hello,

Any news of the module, the link to download it is died :/

Thanks
Reply
#11
thank for the issue, link is corrected

anyway i need to renew to it to 3.3.0, i will do it as soon as possible

Wink
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#12
thank for the issue, link is corrected

anyway i need to renew to it to 3.3.0, i will do it as soon as possible

Wink
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#13
Hi.

Please can you update the link for this module as it is not working again.

Many thanks,
Paul.
Reply
#14
updated to 3.3 Wink

x64 available (other are in built)
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#15
updated to 3.3 Wink

x64 available (other are in built)
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [ UrBackup ] Client/server backup system outkastm 43 25,791 01-07-2019, 06:36 AM
Last Post: outkastm
  [ WD Arkeia Enterprise Backup Agent ] [10.1.10.0] Arkeia Age Qoolbox 1 1,284 09-30-2013, 10:09 PM
Last Post: Qoolbox
  [ WD Arkeia Enterprise Backup Server ] [10.1.10.0] OS6 only Qoolbox 3 1,978 09-30-2013, 10:05 PM
Last Post: Qoolbox
  [ WD Arkeia Enterprise Backup Server ] [10.1.10.0] OS6 only 0 1,083 Less than 1 minute ago
Last Post:
  [ WD Arkeia Enterprise Backup Agent ] [10.1.10.0] Arkeia Age 0 681 Less than 1 minute ago
Last Post:

Forum Jump:


Users browsing this thread: 1 Guest(s)