Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thecus official SDK - 6/17/2011 Version
#31
Qoolbox Wrote:x86 VMDK <!-- m --><a class="postlink" href="http://ftp.thecus.com/module/category-1/vmdk/">http://ftp.thecus.com/module/category-1/vmdk/</a><!-- m -->

Impossible de se connecter avec putty ou Winscp Sad
Impossible to connect thought Putty or Winscp

Mon Ip est bien attribué par mon DHCP, je la Ping... tout est ok
My IP is well given by my DHCP and pingable

SSH et GCC ne sont pas installé donc
SSH and GCC not installed so i did :

Apt-get update
Apt-get upgrade
apt-get install ssh
apt-get install gcc


tout s'installe mais toujours pas accés à la VM à distance.... Sad
All is setup but still no remote access to VM

Ils ont vraiment vérifier leur VM les Techos ???
Did you check the VM ???

Une idée ?
Anyone has idea ?

Hi everybody,

i just would like to add some comments regarding this issue based on my own experience.
1. Basically when we talk about virtual disk and linux OS, i've seen that the best virtual system is not VMWare but VirtualBox...moreover VirtualBox is Free like VMWare player.

2. my test with the X86 VMDK has shown that some problems belong to renamed network interface eth0 to eth1. Maybe some of you will experience such issue, but in this case it is very important to have virtual system setup with Bridged Network and not NAT. Thus, as it is a server (Ubuntu 10.04 LTS) i rather prefere to have Static IP, therefore i modified the /etc/network/interfaces file as my /etc/resolv.conf.
After rebooting system everything is ok and i was able to upgrade & update system with:
Code:
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install ssh
sudo apt-get install gcc

3. i was able to connect to virtual disk using FTPzilla, WinSCP or Putty. For FTPZilla don't forget to use port 22 and not standard port 21.
don't forget to use root as login and 123456 as password.

if you have any question, feel free to contact me Big Grin (even in French)
HTH
Alain Roger
Thecus N4200ECO

[Image: btn_donate_SM.gif]
Reply
#32
HI,

I just made a little update to the SDK files (I let the site admin to control it).
based on my discussion with QoolBox I updated the create_module.sh file to fix the missing </rdf:RDF> at the end of file.
So i updated the set_rdf_file() function adding :
Code:
[echo '</rdf:RDF>' >> $rdf_file
i tested and it works well.

as we are not allowed to send file on this forum i will post mail to <!-- e --><a href="mailto:module@thecus.com">module@thecus.com</a><!-- e --> directly as on facebook.

HTH.

Alain
Alain Roger
Thecus N4200ECO

[Image: btn_donate_SM.gif]
Reply
#33
HI,

I just made a little update to the SDK files (I let the site admin to control it).
based on my discussion with QoolBox I updated the create_module.sh file to fix the missing </rdf:RDF> at the end of file.
So i updated the set_rdf_file() function adding :
Code:
[echo '</rdf:RDF>' >> $rdf_file
i tested and it works well.

as we are not allowed to send file on this forum i will post mail to <!-- e --><a href="mailto:module@thecus.com">module@thecus.com</a><!-- e --> directly as on facebook.

HTH.

Alain
Alain Roger
Thecus N4200ECO

[Image: btn_donate_SM.gif]
Reply
#34
Thecus released an updated mk_module: download

This update fixes the missing closing RDF tag.

/Falk
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#35
Is this fix also the install process when a file start by . (.httacces for example) file was not copied in directory ???

Thanks falk for information i will update mine.
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#36
Qoolbox Wrote:Is this fix also the install process when a file start by . (.httacces for example) file was not copied in directory ???.

Hi Stephane,

no, it just fixes the missing closing RDF tag.

/Falk
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#37
Thanks Falk, 8 month to correct, this ..pffffffff

and now i may be found a new problem on SDK with Thecus Toolchains..

been somedays i try to compile VLC for TVMobili and when i enable libmodplug i got a strange error, i think a file is missing..or else ...

Code:
libtool: link: warning: library `/usr/local/ToolChain/i686-nptl-linux-gnu_1.00/bin/../lib/gcc/i686-nptl-linux-gnu/4.3.2/../../../../i686-nptl-linux-gnu/lib/libstdc++.la' was moved.
/bin/sed: can't read /home/kevin/x-tools/i686-nptl-linux-gnu/i686-nptl-linux-gnu/lib/libstdc++.la: No such file or directory
libtool: link: `/home/kevin/x-tools/i686-nptl-linux-gnu/i686-nptl-linux-gnu/lib/libstdc++.la' is not a valid libtool archive

but strange thing when i try locate file...

Code:
root@debian6-x86:~/source/vlc-1.1.13# locate libstdc++.la
/usr/local/ToolChain/i686-nptl-linux-gnu_1.00/i686-nptl-linux-gnu/sys-root/lib/libstdc++.la
/usr/local/ToolChain/rootfs/lib/libstdc++.la
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#38
Hi Stephane,

Thecus did not clean up their toolchain - the .la file is used by libtool to find compiler and linker settings.

Just open the file:

Code:
/usr/local/ToolChain/i686-nptl-linux-gnu_1.00/i686-nptl-linux-gnu/sys-root/lib/libstdc++.la

and replace the line:

Code:
libdir='/home/kevin/x-tools/i686-nptl-linux-gnu/i686-nptl-linux-gnu/lib'

by

Code:
libdir='/usr/local/ToolChain/i686-nptl-linux-gnu_1.00/i686-nptl-linux-gnu/lib'

or - to fix all .la files at once run

Code:
find /usr/local/ToolChain/i686-nptl-linux-gnu_1.00 -name "*.la" | \
    xargs sed -e \
        's|/home/kevin/x-tools/i686-nptl-linux-gnu|/usr/local/ToolChain/i686-nptl-linux-gnu_1.00|g' -i

Cheers,
Falk
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#39
Thank you Falk...

That works better like that Big Grin

Hope it is this line who avoid my VLC cross compiled version works fine... now libmod passed well...
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#40
Strange,

i applied

Code:
find /usr/local/ToolChain/i686-nptl-linux-gnu_1.00 -name "*.la" | \
    xargs sed -e \
        's|/home/kevin/x-tools/i686-nptl-linux-gnu|/usr/local/ToolChain/i686-nptl-linux-gnu_1.00|g' -i

File has well been modified... on first passed Libmod is ok and if i relaunch my compilation once again, error is back Confusedhock:

Code:
make[5]: entrant dans le répertoire « /root/source/vlc-1.1.13/modules/demux »
  CC     libmod_plugin_la-mod.lo
  CXX    libmod_plugin_la-dummy.lo
  CXXLD  libmod_plugin.la
/bin/sed: can't read /home/kevin/x-tools/i686-nptl-linux-gnu/i686-nptl-linux-gnu/lib/libstdc++.la: No such file or directory
libtool: link: `/home/kevin/x-tools/i686-nptl-linux-gnu/i686-nptl-linux-gnu/lib/libstdc++.la' is not a valid libtool archive
make[5]: *** [libmod_plugin.la] Erreur 1
make[5]: quittant le répertoire « /root/source/vlc-1.1.13/modules/demux »
make[4]: *** [all-recursive] Erreur 1
make[4]: quittant le répertoire « /root/source/vlc-1.1.13/modules/demux »
make[3]: *** [all] Erreur 2
make[3]: quittant le répertoire « /root/source/vlc-1.1.13/modules/demux »
make[2]: *** [all-recursive] Erreur 1
make[2]: quittant le répertoire « /root/source/vlc-1.1.13/modules »
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le répertoire « /root/source/vlc-1.1.13 »
make: *** [all] Erreur 2

after reboot same behavior...

Something strange i have to relaunch ./configure process twice for that works
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#41
Hi Stephane,

after applying changes to the build environment you should always do a "make distclean" or whatever kind of deep cleanup the package supports. Otherwise the pathnames from the previous run will stay in the configure cache (hence the "make distclean") and in Makefiles (deleted by a simple "make clean") ;o)

Cheers,
Falk
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#42
Other thing strange in Toolchain...

in the RootFS

/usr/local/ToolChain/rootfs/lib/pkgconfig

all .pc file have a strange prefix

example fontconfig.pc

Code:
prefix=/home/heidi/ToolChain/x86_32/rootfs
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
includedir=${prefix}/include

Name: Fontconfig
Description: Font configuration and customization library
Version: 2.8.0
Libs: -L${libdir} -lfontconfig
Libs.private: -lxml2    -lfreetype -lz -liconv
Cflags: -I${includedir}

dont know if this has influence on cross compilation...
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#43
Other thing strange in Toolchain...

in the RootFS

/usr/local/ToolChain/rootfs/lib/pkgconfig

all .pc file have a strange prefix

example fontconfig.pc

Code:
prefix=/home/heidi/ToolChain/x86_32/rootfs
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
includedir=${prefix}/include

Name: Fontconfig
Description: Font configuration and customization library
Version: 2.8.0
Libs: -L${libdir} -lfontconfig
Libs.private: -lxml2    -lfreetype -lz -liconv
Cflags: -I${includedir}

dont know if this has influence on cross compilation...
Stéphane Guérithault

In a world without walls and fences, who needs Windows and Gates

PayPal Donation: https://www.paypal.me/qoolbox

My apps

##########################################################################

rolling now for competitor, i do not support anymore Thecus apllications due to lack of time

##########################################################################


voyance - Sophrologue Hypnothérapeute Essonne 
Reply
#44
Qoolbox Wrote:Other thing strange in Toolchain...
in the RootFS
/usr/local/ToolChain/rootfs/lib/pkgconfig
all .pc file have a strange prefix

This will cause the tests for dependencies to fail since this will be used to extend the build environment.

Until there is some other solution/fix just run SED as follows again:

Code:
sed -e 's|/home/heidi/ToolChain/x86_32/rootfs|/usr/local/ToolChain/rootfs|g' \
    -i /usr/local/ToolChain/rootfs/lib/pkgconfig/*.pc

Cheers,
Falk
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply
#45
Qoolbox Wrote:Other thing strange in Toolchain...
in the RootFS
/usr/local/ToolChain/rootfs/lib/pkgconfig
all .pc file have a strange prefix

This will cause the tests for dependencies to fail since this will be used to extend the build environment.

Until there is some other solution/fix just run SED as follows again:

Code:
sed -e 's|/home/heidi/ToolChain/x86_32/rootfs|/usr/local/ToolChain/rootfs|g' \
    -i /usr/local/ToolChain/rootfs/lib/pkgconfig/*.pc

Cheers,
Falk
Further information und module downloads at FaJo.de

I decided to finally stop module development and maintenance. Existing modules are still available for download for now.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [REQUEST] Newer version Subsonic for Thecus N2310 saken 2 1,506 03-28-2017, 06:09 AM
Last Post: outkastm
  [XBMC][version 13 gotham] on thecus N5550 ptran1234 3 1,677 09-02-2014, 12:10 PM
Last Post: John Tsai
  Thecus SDK (beta version) is available!! Thecus - Kevin 3 2,765 06-01-2011, 09:38 PM
Last Post: fajo
  [XBMC][version 13 gotham] on thecus N5550 0 872 Less than 1 minute ago
Last Post:

Forum Jump:


Users browsing this thread: 1 Guest(s)