I Love Thecus
N2810pro - no shutdown after new firmware and bios update - Printable Version

+- I Love Thecus (https://forum.thecus.com)
+-- Forum: Thecus Windows NAS (https://forum.thecus.com/forumdisplay.php?fid=66)
+--- Forum: NAS from 2 to 5 bays - SMB (https://forum.thecus.com/forumdisplay.php?fid=52)
+--- Thread: N2810pro - no shutdown after new firmware and bios update (/showthread.php?tid=13220)



N2810pro - no shutdown after new firmware and bios update - heesters - 05-20-2017

Hi,

a few days ago, i´ve bought the device n2810pro. Without updating the firmware, the shutdown and poweroff, done by OS or pressing the power-button, worked fine.
Now afterwards the system cannot be switched off anymore, without pressing a few seconds the power button.

Inside i use 2 WD RED 4TB as RAID-0 Btfrs.

How can i solve this problem ?

Thanks and best regards
mike from germany


RE: N2810pro - no shutdown after new firmware and bios update - heesters - 05-20-2017

(05-20-2017, 06:59 AM)heesters Wrote: Hi,

a few days ago, i´ve bought the device n2810pro. Without updating the firmware, the shutdown and poweroff, done by OS or pressing the power-button, worked fine.
Now afterwards the system cannot be switched off anymore, without pressing a few seconds the power button.

Inside i use 2 WD RED 4TB as RAID-0 Btfrs.

How can i solve this problem ?

Thanks and best regards
mike from germany

I forgot to inform, that i am able to shutdown if there is no HHD inside the nas. But how can i rebuild the nas ? because the functionality "Remove RAID" does also not work. If i try i get the working circle the whole nigh and nothing happens. Then i switched of the device with disconncting power and when i restart the nas the RAID is healthy ???
Best regards
mike


RE: N2810pro - no shutdown after new firmware and bios update - heesters - 05-21-2017

(05-20-2017, 05:15 PM)heesters Wrote:
(05-20-2017, 06:59 AM)heesters Wrote: Hi,

a few days ago, i´ve bought the device n2810pro. Without updating the firmware, the shutdown and poweroff, done by OS or pressing the power-button, worked fine.
Now afterwards the system cannot be switched off anymore, without pressing a few seconds the power button.

Inside i use 2 WD RED 4TB as RAID-0 Btfrs.

How can i solve this problem ?

Thanks and best regards
mike from germany

I forgot to inform, that i am able to shutdown if there is no HHD inside the nas. But how can i rebuild the nas ? because the functionality "Remove RAID" does also not work. If i try i get the working circle the whole nigh and nothing happens. Then i switched of the device with disconncting power and when i restart the nas the RAID is healthy ???
Best regards
mike



Sorry, i installed a RAID-1 with Btfrs. Is there an app, which let me delete and create again the raid-1 ?


RE: N2810pro - no shutdown after new firmware and bios update - Thecus - Yvon - 05-24-2017

Dear Sir,

Thecus NAS support HDD hot plug, thus you could power NAS up without HDD, since NAS power up ready and hot plug HDD into NAS, for a new RAID volume.